Shenzhen XDK Communication Equipment CO., LTD
|
Price: | 10.0~40.0 USD |
Payment Terms: | T/T,WU |
Special Groups: |
Epon-ONU (7)
|
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
1,Special Features
1.1,Data service function
= Full speed without blockingexchange
= 8K MACaddress table
= SupportFull Range VLAN ID
= Support QinQ VLAN,1:1VLAN,VLAN Trunk etc.
= support portmonitor, port mirror ,port speed limit ,port SLA etc.
= QoS based on interface,IEEE802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLANID,destination MAC or source MAC.
= The Ethernet interfaces according to thespecifications of the IEEE802.3.
= 128-bit AES encryption algorithm.
= According to 802.1x remote management and userauthentication
= Support WiFi function.
1.2,Telephone service function
= Support SIP protocol,H.248 protocol,H.323 optional.
= Support ITU-T G.711,G.723.1,G.729 compression algorithm
= Echo cancellation meets ITU-T G.168-2002. echo cancellation for thelongest is 128ms.
= Support OSPF,T38.
= Support RFC2833 and RFC2833 redundant,distinctive ringing ,MD5certificate,call forwarding,call waiting,telephone hotline,alarm clock,abbreviateddialing and etc.
= Support two POTS interface three-way calling,three-way calling supportlocal mixing.
= Support POTS GR909 line test function.
= Support dynamic PPPoE,dhcp and static IP.
= Support CTC2.1 standard
= 7×24h call lose≤0.01%
2,Product specifications
Item | Parameter | specification |
Optical interface specification | Transmission rate | = Downstream:1.25 Gbps = Upstream:1.25 Gbps |
Optical specifications | = Downstream – Wavelength:1490nm+/-20nm – Minimum receiver sensitivity:-27dBm – Receive saturation power:-3dBm = Upstream – Wavelength:1310nm+/-50nm – Minimum output optical power:0dBm | |
Number of users can be connected | Up to 32 users within 20km. | |
E8068U connector | SC/APC | |
Optical physical conditions | = IEEE802.3-2005 = 1000 BASE-PX20+ | |
G.652 single-mode fiber | ||
Ethernet interface specification | standard | = IEEE802.3 = IEEE802.3au = IEEE802.3x |
Port number | 4 FE | |
Connector type | RJ-45 | |
impedance | 100 Ohm | |
LAN | = IEEE 802.3 = 10/100BASE-T, = Automated negotiation = Full duplex/Half duplex = Support RJ-45 MDI/MDIX | |
VLAN | IEEE802.1q | |
Support the connection distance | Up to 100 meters | |
WLAN | Compliant with IEEE802.11b/g/n | |
CATV interface specification | Receiving wavelength range | 1550±10nm |
light reflection loss | >45dB | |
input power range | +2dBm~-8dBm | |
RFinterface specification | Operation bandwidth | 45~1000MHz |
RF output level | 80dBuV | |
RF dB | ±1.5 dB | |
RF output reflection loss | ≥14dB | |
E8068U Power consumption | ≤13W | |
Adapter input | 100V~240V AC,50 Hz/60Hz | |
E8068U adapt output | 12V±10%,2A | |
EMC and safety | EMC | EN55022 B(CISPR 22B) |
ESD defend and preserve | IEC 61000-4-2 GR-1089-CORE | |
Laser eye safety | l FDA 21CFR 1040.10 and 1040.11 l EN(IEC) 60825-1 l EN(IEC) 60825-2 | |
Environment-protection standard | RoHS | |
Environmental requirements | Running temperature | -10ºC~55ºC |
Storage temperature | -30ºC~60ºC | |
Operating humidity | 10%~90% ,on-condensing | |
Storage humidity | 5%~95% ,Non-condensing | |
Physical specifications | Size | L x W x H:245 mm x 150 mm x 37mm |
Weight | <500g |