Shenzhen XDK Communication Equipment CO., LTD
|
Price: | 10.0~40.0 USD |
Payment Terms: | T/T,WU |
Place of Origin: | Guangdong, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
E8604T OLT supports the symmetric uplink/downlink1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernetservices, helping carriers to provide reliable services to their users.
Its coupling ratio, 1:64, and its support ofdifferent hybrid ONU networks minimize the carrier's investment.
E8604T has strong functions and QoS guarantee ,and supports SLA and DBA.
Main Advantages
E8604T is an optical network device seriesthat is suitable for the current market; one E8604T supports up to four EPONsystems, so it has the following advantages:
Ø EPON:E8604T supports IEEE802.3ah and PRCCommunity Industry Standard (YD/T 1475-2006).
Ø System'scapacity:Themodularized PON card of E8604T can support one to four EPON systemssimultaneously, up to 256 ONUs and the 1/64 coupling ratio.
Ø Uplink interface: Its flexible design supportsvarious MAN interface type groups. The optical ports or the electrical portsare selected according to network conditions.
Ø Device size: A 1U device occupies a little space and consumes little power,decreasing the function cost of the services.
Ø Protectingthe bus optical fiber:E8604T supports that the link can be automatically switched to protect theoptical fiber when trouble occurs in the optical fiber.
Ø Itis highly reliable and powered by two power sources.
MainCharacteristics
Ø It adopts the point-to-multipoint network topology,effectively collects separate Ethernet services and aggregates them on the MANnode. It connects the upper-layer devices through the GE interface and can beconnected to the existing network smoothly.
Ø The Dynamic Bandwidth Allocation (DBA) mechanismenables all users to share the 1Gbps bandwidth reasonably, guaranteeing areliable QoS.
Ø The Rapid Spanning Tree Protocol (RSTP) enables theredundant interconnection between OLT and backbone network.
Ø They support the IGMP multicast and efficientlyutilize the bandwidth. They support the multicast VLAN.
Ø It supports the broadcast of IPTV, voice and datasimultaneously.
Ø It has rich OAM functions such as configuration,alarm, performance monitoring, trouble isolation and security management. Atthe same time, it supports the CLI/GUI management, which is easy to use.
TechnicalParameters
Attributes | E8604T |
System's capacity | Maximum coupling ratio, 1:64 32G backplane bandwidth |
Interface | 6 GE ports (2 gigabit RJ45 ports, 2 combo ports, 2 gigabit optical ports) 4 fixed EPON ports |
PON interface | A 1Gbps transmission rate with downlink and uplink symmetry Average luminous power on the PON port: +2dbm ~ +7dbm Optical acceptance senitivity of the PON port: not less than -30dBm Security: ONU authentication mechanism Network coverage diameter: 30 kilometers |
Standard | IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet – II, Ethernet-SNAP IEEE 802.3ad VLAN Stacking( Q in Q) |
L3 functions | Supporting static route |
QoS | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE p802.1p, CoS WR, SP and FIFO Supporting the Mark/Remark priority of 802.1P/DSCP Limiting the uplink/downlink rate based on each ONU Supporting DBA and SLA |
VLAN | Port-based VLAN GVRP IEEE802.1Q VLAN relay Supporting QinQ and flexible QinQ |
Multicast | IGMP v1/v2/v3 IGMP Snooping Multicast VLAN and limited multicast |
Reliability | Unidirectional Link Detection (UDLD) Hot swap of the EPON optical module on the expanded slot EAPS fast loopback protection function Optical path protection of EPON |
Network security | Limiting the maximum number of users on each port Port isolation Controlling the storm of packets Flow-based ACL access control function Transmission data encryption on the PON interface |
Configuration management | Various management modes such as CLI, Web, SNMP, TELNET and cluster RMONv1, group 1, group 2, group 3 and group 9 SSHv1/v2 Upgrading the software and the bootrom through TFTP and FTP Local or the server's syslog logs Command prompt in English or in Chinese Network testing tools such as ping and traceroute Debug output |
Physical Characters | 442mm(W) x315mm(D) x 44mm(H) |
Installation: A 19-inch cabinet | |
Weight: 2kg | |
Environment requirements | Working condition: 0℃-55℃; 10%-85% no condensation |
Storage condition: -40℃-80℃; 5%-95%; no condensation | |
Power Source | Input voltage: AC100-240V Supporting power input from two power sources Input current: 1A/230V Power consumption: Up to 40W |